Silicraft Industrial Silicone Atelier
Request a Quote
Infusion Pump Tubing
MG-002 · infusion-pump-tubing

Infusion Pump Tubing

DEHP-free, ±0.05 mm bore

The Infusion Pump Tubing is a DEHP-free, ±0.05 mm bore. We mold it by LSR extrusion in a Shore A 45–60 compound, holding ±0.05 mm across production lots, and it complies with ISO 13485 · USP Class VI · ISO 10993-5 · DEHP free. Typical minimum order is 5,000 m; series lead time is 24 days.

Precision-bore LSR tubing for peristaltic infusion pumps, where wall recovery drives dose accuracy. Supplied cut to length with clean-room bagging.

  • ±0.05 mm bore tolerance
  • Consistent peristaltic recovery
  • DEHP and PVC free
Request a quote

Specification

Hardness Shore A 45–60
Service temperature -50–200 °C
Achievable tolerance ±0.05 mm
Molding process LSR extrusion
Typical MOQ 5,000 m
Lead time 24 days

Compliance

  • ISO 13485
  • USP Class VI
  • ISO 10993-5
  • DEHP free

Frequently asked about this part

What is the minimum order quantity for the Infusion Pump Tubing?

Typically 5,000 m. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Infusion Pump Tubing?

Series production runs 24 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Infusion Pump Tubing?

±0.05 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Infusion Pump Tubing comply with?

It is produced to ISO 13485 · USP Class VI · ISO 10993-5 · DEHP free. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Infusion Pump Tubing molded?

By LSR extrusion, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Infusion Pump Tubing use?

Shore A 45–60, with a service range of -50–200 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Medical Silicone O-Ring Medical Silicone O-Ring USP Class VI, Class 8 molded Respiratory Mask Cushion Respiratory Mask Cushion Ultra-soft face seal, 20–35 Shore A Catheter Balloon Catheter Balloon Thin-wall, ±0.05 mm wall control Medical Silicone Tourniquet Medical Silicone Tourniquet Latex-free, autoclavable strap

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote