Silicraft Industrial Silicone Atelier
Request a Quote
Medical Silicone Tourniquet
MG-002 · medical-silicone-tourniquet

Medical Silicone Tourniquet

Latex-free, autoclavable strap

The Medical Silicone Tourniquet is a latex-free, autoclavable strap. We mold it by HCR extrusion in a Shore A 35–50 compound, holding ±0.30 mm across production lots, and it complies with ISO 13485 · ISO 10993-10 · Latex free. Typical minimum order is 1,000 pcs; series lead time is 20 days.

A flat latex-free strap with a moulded buckle clip, replacing rubber tourniquets in departments that have gone latex free. Autoclavable and wipe-clean.

  • 100% latex free
  • Autoclave and wipe-down safe
  • Moulded one-piece buckle
Request a quote

Specification

Hardness Shore A 35–50
Service temperature -40–180 °C
Achievable tolerance ±0.30 mm
Molding process HCR extrusion
Typical MOQ 1,000 pcs
Lead time 20 days

Compliance

  • ISO 13485
  • ISO 10993-10
  • Latex free

Frequently asked about this part

What is the minimum order quantity for the Medical Silicone Tourniquet?

Typically 1,000 pcs. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Medical Silicone Tourniquet?

Series production runs 20 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Medical Silicone Tourniquet?

±0.30 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Medical Silicone Tourniquet comply with?

It is produced to ISO 13485 · ISO 10993-10 · Latex free. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Medical Silicone Tourniquet molded?

By HCR extrusion, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Medical Silicone Tourniquet use?

Shore A 35–50, with a service range of -40–180 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Medical Silicone O-Ring Medical Silicone O-Ring USP Class VI, Class 8 molded Respiratory Mask Cushion Respiratory Mask Cushion Ultra-soft face seal, 20–35 Shore A Catheter Balloon Catheter Balloon Thin-wall, ±0.05 mm wall control Infusion Pump Tubing Infusion Pump Tubing DEHP-free, ±0.05 mm bore

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote