Silicraft Industrial Silicone Atelier
Request a Quote
Silicone Baking Mold
FG-001 · silicone-baking-mold

Silicone Baking Mold

Twelve-cavity muffin tray, platinum-cured

The Silicone Baking Mold is a twelve-cavity muffin tray, platinum-cured. We mold it by LSR injection in a Shore A 40–60 compound, holding ±0.15 mm across production lots, and it complies with FDA 21 CFR 177.2600 · LFGB §31 · EU 1935/2004. Typical minimum order is 500 pcs; series lead time is 18 days.

A flexible twelve-cavity baking tray molded in platinum-cured food silicone. Post-baked to drive off volatiles so the part does not bloom or carry odour after repeated oven cycles.

  • Platinum-cured, post-baked
  • Flexible demoulding without grease
  • Dishwasher and oven safe to 230 °C
Request a quote

Specification

Hardness Shore A 40–60
Service temperature -40–230 °C
Achievable tolerance ±0.15 mm
Molding process LSR injection
Typical MOQ 500 pcs
Lead time 18 days

Compliance

  • FDA 21 CFR 177.2600
  • LFGB §31
  • EU 1935/2004

Frequently asked about this part

What is the minimum order quantity for the Silicone Baking Mold?

Typically 500 pcs. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Silicone Baking Mold?

Series production runs 18 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Silicone Baking Mold?

±0.15 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Silicone Baking Mold comply with?

It is produced to FDA 21 CFR 177.2600 · LFGB §31 · EU 1935/2004. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Silicone Baking Mold molded?

By LSR injection, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Silicone Baking Mold use?

Shore A 40–60, with a service range of -40–230 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Silicone Kitchen Utensil Set Silicone Kitchen Utensil Set Over-molded heads on beech handles Coffee Machine Gasket Coffee Machine Gasket Group-head seal rated to 230 °C Silicone Ice Cube Tray Silicone Ice Cube Tray Eight large cubes with a flexible lid Food Container Seal Lid Food Container Seal Lid Stretch lid, 200 °C oven safe

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote