Silicraft Industrial Silicone Atelier
Request a Quote
Silicone Ice Cube Tray
FG-001 · silicone-ice-cube-tray

Silicone Ice Cube Tray

Eight large cubes with a flexible lid

The Silicone Ice Cube Tray is a eight large cubes with a flexible lid. We mold it by LSR injection in a Shore A 35–50 compound, holding ±0.20 mm across production lots, and it complies with FDA 21 CFR 177.2600 · LFGB §31 · EU 1935/2004. Typical minimum order is 1,000 pcs; series lead time is 16 days.

An eight-cavity tray with a snap-on silicone lid, so the stack does not leak and the cubes release with a single twist. Food-contact compound, freezer stable.

  • Stackable with sealing lid
  • Twist-release cube extraction
  • -40 °C freezer stable
Request a quote

Specification

Hardness Shore A 35–50
Service temperature -40–220 °C
Achievable tolerance ±0.20 mm
Molding process LSR injection
Typical MOQ 1,000 pcs
Lead time 16 days

Compliance

  • FDA 21 CFR 177.2600
  • LFGB §31
  • EU 1935/2004

Frequently asked about this part

What is the minimum order quantity for the Silicone Ice Cube Tray?

Typically 1,000 pcs. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Silicone Ice Cube Tray?

Series production runs 16 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Silicone Ice Cube Tray?

±0.20 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Silicone Ice Cube Tray comply with?

It is produced to FDA 21 CFR 177.2600 · LFGB §31 · EU 1935/2004. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Silicone Ice Cube Tray molded?

By LSR injection, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Silicone Ice Cube Tray use?

Shore A 35–50, with a service range of -40–220 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Silicone Baking Mold Silicone Baking Mold Twelve-cavity muffin tray, platinum-cured Silicone Kitchen Utensil Set Silicone Kitchen Utensil Set Over-molded heads on beech handles Coffee Machine Gasket Coffee Machine Gasket Group-head seal rated to 230 °C Food Container Seal Lid Food Container Seal Lid Stretch lid, 200 °C oven safe

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote