Silicraft Industrial Silicone Atelier
Request a Quote
Silicone Rubber Keypad
IG-005 · silicone-rubber-keypad

Silicone Rubber Keypad

1M-cycle domes, no legends

The Silicone Rubber Keypad is a 1M-cycle domes, no legends. We mold it by HCR compression in a Shore A 40–60 compound, holding ±0.10 mm across production lots, and it complies with ASTM D2000 · RoHS · REACH · 1M cycles. Typical minimum order is 1,000 pcs; series lead time is 22 days.

A molded keypad with tuned dome force and optional carbon pill contacts. Supplied blank or laser-etched; legends are etched on request to a supplied artwork file.

  • 1 million cycle rated
  • Carbon pill contact option
  • Laser-etched legends on request
Request a quote

Specification

Hardness Shore A 40–60
Service temperature -60–200 °C
Achievable tolerance ±0.10 mm
Molding process HCR compression
Typical MOQ 1,000 pcs
Lead time 22 days

Compliance

  • ASTM D2000
  • RoHS
  • REACH
  • 1M cycles

Frequently asked about this part

What is the minimum order quantity for the Silicone Rubber Keypad?

Typically 1,000 pcs. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Silicone Rubber Keypad?

Series production runs 22 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Silicone Rubber Keypad?

±0.10 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Silicone Rubber Keypad comply with?

It is produced to ASTM D2000 · RoHS · REACH · 1M cycles. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Silicone Rubber Keypad molded?

By HCR compression, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Silicone Rubber Keypad use?

Shore A 40–60, with a service range of -60–200 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Industrial Silicone Seal Strip Industrial Silicone Seal Strip Extruded D-profile, adhesive backed Vibration Damping Pad Vibration Damping Pad Ribbed, 30–50 Shore A Silicone Bellows Silicone Bellows Corrugated protective boot High-Temperature Silicone Roller High-Temperature Silicone Roller 300 °C rated, ground finish

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote