Silicraft Industrial Silicone Atelier
Request a Quote
Vibration Damping Pad
IG-005 · vibration-damping-pad

Vibration Damping Pad

Ribbed, 30–50 Shore A

The Vibration Damping Pad is a ribbed, 30–50 Shore A. We mold it by HCR compression in a Shore A 30–50 compound, holding ±0.25 mm across production lots, and it complies with ASTM D2000 · SAE J200 · RoHS · REACH. Typical minimum order is 1,000 pcs; series lead time is 20 days.

Ribbed pads placed under machinery feet and panels. The rib pattern spreads point loads so the pad damps without taking a permanent set.

  • Ribbed load-spreading face
  • Low compression set
  • Oil and coolant resistant
Request a quote

Specification

Hardness Shore A 30–50
Service temperature -60–200 °C
Achievable tolerance ±0.25 mm
Molding process HCR compression
Typical MOQ 1,000 pcs
Lead time 20 days

Compliance

  • ASTM D2000
  • SAE J200
  • RoHS
  • REACH

Frequently asked about this part

What is the minimum order quantity for the Vibration Damping Pad?

Typically 1,000 pcs. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Vibration Damping Pad?

Series production runs 20 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Vibration Damping Pad?

±0.25 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Vibration Damping Pad comply with?

It is produced to ASTM D2000 · SAE J200 · RoHS · REACH. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Vibration Damping Pad molded?

By HCR compression, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Vibration Damping Pad use?

Shore A 30–50, with a service range of -60–200 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Industrial Silicone Seal Strip Industrial Silicone Seal Strip Extruded D-profile, adhesive backed Silicone Rubber Keypad Silicone Rubber Keypad 1M-cycle domes, no legends Silicone Bellows Silicone Bellows Corrugated protective boot High-Temperature Silicone Roller High-Temperature Silicone Roller 300 °C rated, ground finish

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote