Silicraft Industrial Silicone Atelier
Request a Quote
Silicone Bib
IM-004 · silicone-baby-bib

Silicone Bib

Crumb catcher, four neck settings

The Silicone Bib is a crumb catcher, four neck settings. We mold it by LSR injection in a Shore A 30–45 compound, holding ±0.25 mm across production lots, and it complies with EN 14350 · EN 71-3 · BPA free · Food contact. Typical minimum order is 1,500 pcs; series lead time is 18 days.

A soft bib with a wide crumb pocket that holds its shape when loaded. Four moulded neck holes give adjustability without a strap or clip to break.

  • Self-supporting crumb pocket
  • Four moulded neck settings
  • Wipe clean, dishwasher safe
Request a quote

Specification

Hardness Shore A 30–45
Service temperature -30–180 °C
Achievable tolerance ±0.25 mm
Molding process LSR injection
Typical MOQ 1,500 pcs
Lead time 18 days

Compliance

  • EN 14350
  • EN 71-3
  • BPA free
  • Food contact

Frequently asked about this part

What is the minimum order quantity for the Silicone Bib?

Typically 1,500 pcs. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Silicone Bib?

Series production runs 18 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Silicone Bib?

±0.25 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Silicone Bib comply with?

It is produced to EN 14350 · EN 71-3 · BPA free · Food contact. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Silicone Bib molded?

By LSR injection, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Silicone Bib use?

Shore A 30–45, with a service range of -30–180 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Silicone Baby Pacifier Silicone Baby Pacifier EN 14350, symmetric teat Silicone Teething Ring Silicone Teething Ring Textured, one-piece, no fillers Breast Pump Flange Breast Pump Flange Cushioned funnel, BPA-free Baby Soft Spoon Baby Soft Spoon Rounded bowl, stubby grip

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote