Silicraft Industrial Silicone Atelier
Request a Quote
Silicone Baby Pacifier
IM-004 · silicone-baby-pacifier

Silicone Baby Pacifier

EN 14350, symmetric teat

The Silicone Baby Pacifier is a EN 14350, symmetric teat. We mold it by LSR injection in a Shore A 20–35 compound, holding ±0.10 mm across production lots, and it complies with EN 14350 · FDA 21 CFR 177.2600 · BPA free · Phthalate free. Typical minimum order is 2,000 pcs; series lead time is 20 days.

A one-piece pacifier: shield and teat molded as a single part, so there is no joint to trap water. Supplied in retail-ready bagging with batch traceability.

  • One-piece, no water trap
  • EN 14350 tested
  • BPA and phthalate free
Request a quote

Specification

Hardness Shore A 20–35
Service temperature -30–180 °C
Achievable tolerance ±0.10 mm
Molding process LSR injection
Typical MOQ 2,000 pcs
Lead time 20 days

Compliance

  • EN 14350
  • FDA 21 CFR 177.2600
  • BPA free
  • Phthalate free

Frequently asked about this part

What is the minimum order quantity for the Silicone Baby Pacifier?

Typically 2,000 pcs. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Silicone Baby Pacifier?

Series production runs 20 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Silicone Baby Pacifier?

±0.10 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Silicone Baby Pacifier comply with?

It is produced to EN 14350 · FDA 21 CFR 177.2600 · BPA free · Phthalate free. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Silicone Baby Pacifier molded?

By LSR injection, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Silicone Baby Pacifier use?

Shore A 20–35, with a service range of -30–180 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Silicone Teething Ring Silicone Teething Ring Textured, one-piece, no fillers Breast Pump Flange Breast Pump Flange Cushioned funnel, BPA-free Silicone Bib Silicone Bib Crumb catcher, four neck settings Baby Soft Spoon Baby Soft Spoon Rounded bowl, stubby grip

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote