Silicraft Industrial Silicone Atelier
Request a Quote
Silicone Teething Ring
IM-004 · silicone-teething-ring

Silicone Teething Ring

Textured, one-piece, no fillers

The Silicone Teething Ring is a textured, one-piece, no fillers. We mold it by LSR injection in a Shore A 25–40 compound, holding ±0.20 mm across production lots, and it complies with EN 14350 · EN 71-3 · BPA free · Phthalate free. Typical minimum order is 2,000 pcs; series lead time is 18 days.

A solid teething ring with graduated surface textures for different stages. Molded in one piece with no liquid or gel filler, so it cannot leak if bitten through.

  • Solid, no gel filler
  • Graduated textures
  • EN 71-3 toy safety tested
Request a quote

Specification

Hardness Shore A 25–40
Service temperature -30–180 °C
Achievable tolerance ±0.20 mm
Molding process LSR injection
Typical MOQ 2,000 pcs
Lead time 18 days

Compliance

  • EN 14350
  • EN 71-3
  • BPA free
  • Phthalate free

Frequently asked about this part

What is the minimum order quantity for the Silicone Teething Ring?

Typically 2,000 pcs. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Silicone Teething Ring?

Series production runs 18 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Silicone Teething Ring?

±0.20 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Silicone Teething Ring comply with?

It is produced to EN 14350 · EN 71-3 · BPA free · Phthalate free. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Silicone Teething Ring molded?

By LSR injection, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Silicone Teething Ring use?

Shore A 25–40, with a service range of -30–180 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Silicone Baby Pacifier Silicone Baby Pacifier EN 14350, symmetric teat Breast Pump Flange Breast Pump Flange Cushioned funnel, BPA-free Silicone Bib Silicone Bib Crumb catcher, four neck settings Baby Soft Spoon Baby Soft Spoon Rounded bowl, stubby grip

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote