Silicraft Industrial Silicone Atelier
Request a Quote
Baby Soft Spoon
IM-004 · silicone-baby-soft-spoon

Baby Soft Spoon

Rounded bowl, stubby grip

The Baby Soft Spoon is a rounded bowl, stubby grip. We mold it by LSR injection in a Shore A 25–40 compound, holding ±0.15 mm across production lots, and it complies with EN 14350 · FDA 21 CFR 177.2600 · BPA free. Typical minimum order is 2,000 pcs; series lead time is 16 days.

A short soft spoon sized for a self-feeding infant, with a rounded bowl that will not hurt gums and a thick handle a small hand can hold.

  • Rounded gum-safe bowl
  • Stubby handle for small hands
  • Food-contact, BPA free
Request a quote

Specification

Hardness Shore A 25–40
Service temperature -30–180 °C
Achievable tolerance ±0.15 mm
Molding process LSR injection
Typical MOQ 2,000 pcs
Lead time 16 days

Compliance

  • EN 14350
  • FDA 21 CFR 177.2600
  • BPA free

Frequently asked about this part

What is the minimum order quantity for the Baby Soft Spoon?

Typically 2,000 pcs. Below that we can still quote, but tooling amortisation starts to dominate the unit price. Sampling and tooling are quoted separately from series production.

What is the lead time for the Baby Soft Spoon?

Series production runs 16 days after sample approval. Tool design and T1 sampling add 10–14 days up front, and DFM feedback on your drawing comes back within 48 hours.

What tolerance can you hold on the Baby Soft Spoon?

±0.15 mm is the achievable production tolerance for this part family. It covers the dimensions that matter for fit and sealing; we confirm which ones are critical in the DFM memo before tooling is cut.

Which standards does the Baby Soft Spoon comply with?

It is produced to EN 14350 · FDA 21 CFR 177.2600 · BPA free. Certificates and test reports are on file and can be forwarded once an NDA is in place.

How is the Baby Soft Spoon molded?

By LSR injection, in a cell dedicated to that silicone grade. Medical parts are never run on a line that has produced kitchenware — each grade keeps its own press, tooling and QC station.

What hardness and temperature range does the Baby Soft Spoon use?

Shore A 25–40, with a service range of -30–180 °C. If your application needs a different durometer in the same geometry, we can usually re-quote the compound without cutting new tooling.

Other products in this category

Silicone Baby Pacifier Silicone Baby Pacifier EN 14350, symmetric teat Silicone Teething Ring Silicone Teething Ring Textured, one-piece, no fillers Breast Pump Flange Breast Pump Flange Cushioned funnel, BPA-free Silicone Bib Silicone Bib Crumb catcher, four neck settings

Need this part quoted?

Send the drawing or a sample. DFM feedback and a quotation within two business days.

Request a quote